Sculpting has been something on my “todo” list for a while, but it’s been very hard to up and just do it. I’ve had some opportunities recently to try some simple stuff, so here’s some more. I’m trying to sculpt a fireball impacting on Killjoys chest.
I started by just mushing a thick misshapen cylinder of putty onto his chest. The idea is that it’ll look like a fireball that’s being shot by the Fire Gamin, so I have to ensure that the angle looks reasonable and that the size of it is similar to the one that’s coming out of the Fire Gamin‘s hands. I left that overnight.
The next morning I pulled little pieces of putty apart and rolled them into snakes that were roughly long enough to go entirely around the cylinder on his chest. I’m aware that this first photo looks phallic.
After I’d sufficiently mushed the putty around the cylinder, I took a pair of tweezers and pulled the putty back away from his torso. The fireball is travelling towards Killjoy, and so the wind against it will push the flames backwards. I did this 5 times, to cover the entire cylinder with flames.
At the end I took a bit of putty and mushed it onto the end of the cylinder, then pulled it away. This pulled the new putty off a few times, and tore it in places, but the end result was what I had wanted – a bit of a wisp of flame at the tail of the fireball!
No Comments